PDA

View Full Version : polyurethane (plastic) cornice



DMC
03-11-2013, 03:27 PM
Was fitting some of this cornice and noticed a difference in the thickness of the profiles of each length, even from the same box. Anyone else experienced this.

TonyM
03-11-2013, 06:00 PM
It's shite, thats why.

E.K Taper
03-11-2013, 06:48 PM
Was fitting some of this cornice and noticed a difference in the thickness of the profiles of each length, even from the same box. Anyone else experienced this.
Is that the stuff from B Gypsum, the Lite coving? If so, see the above reply from Tony

forestbhoy
03-11-2013, 07:17 PM
Never used it and only seen diy work by people who have never done coving before with it. Bag of nails if you ask me imho ....

DMC
04-11-2013, 07:23 PM
The site i am on just now has this shit specified, more trouble than its worth.

E.K Taper
05-11-2013, 10:16 PM
Is that the Persimmon site ,DMC? Whatever you do, don't use fast set to stick it! I mAde that mistake once, the coving came down after six months (spotless clean) and the filler was all left on the ceiling/ walls:o

DMC
06-11-2013, 06:51 PM
Is that the Persimmon site ,DMC? Whatever you do, don't use fast set to stick it! I mAde that mistake once, the coving came down after six months (spotless clean) and the filler was all left on the ceiling/ walls:o

Its the Charles Church side adjacent to it EK, were using the proper adhesive so should stay up beyond 6 months :w00t:

E.K Taper
07-11-2013, 09:24 PM
Lol what is the proper adhesive for it Davie? Just in case...........

belmoreboy
08-11-2013, 04:41 PM
Is it the Artline coving ? or a different brand

DMC
08-11-2013, 08:19 PM
Lol what is the proper adhesive for it Davie? Just in case...........

Were using blu tack, failing that http://www.oracdecor.com/en/fdp600-decofix-pro-2

DMC
08-11-2013, 08:20 PM
Is it the Artline coving ? or a different brand


This stuff is coming from Belgium, Will check out the proper name etc on Monday. Pretty sure 'plastic shit' isnt its official title :sneaky: