PDA

View Full Version : Premier pump spares



prjwebb
13-08-2014, 08:48 PM
I'm thinking it's time to replace the plunger parts on my old Premier pump. It's working ok but prob not as efficient as it should be. As the Blue Line parts aren't too easy to find over here, do the Columbia or Tapetech parts all fit or are there slight differences?
Also is it possible to buy the flatbox nozzle separately? I've lost the bit you remove to fill angle boxes but begrudge paying for the whole setup when I have the main bit that bolts to the pump already.
Thanks!

E.K Taper
13-08-2014, 08:57 PM
Tapepro is the site you need mate. They're Australian outfit but have a distributor in England. I've got blue line pump and had a blue line angle box and got my spares from them.
I'll try and post a link but I'm on my phone

http://www.tapepro.co.uk/

There Ye go

ALROH57
13-08-2014, 09:09 PM
I will have a look at it as well my old premier has to be primed before she wants to perform.

prjwebb
13-08-2014, 09:10 PM
Nice one!

prjwebb
13-08-2014, 09:20 PM
Hmmm can't find much on there. Will have to contact them I guess.

The premier stuff is so solid and great kit but it is a wind up when it comes to getting spares. I was looking for some little wheels for the nail spotter too but no luck. Walls and ceiling have some blue line bits.

E.K Taper
13-08-2014, 09:41 PM
Went on it myself there, the sites changed a bit. Used to be a section detailing all the repair kits they done and there was prices for everything. Best give them a bell!

E.K Taper
13-08-2014, 09:59 PM
Download the pdf on the right hand side of this page "Tapepro repair kits"
http://www.tapepro.co.uk/?p=repairs

ALROH57
14-08-2014, 04:21 AM
Download the pdf on the right hand side of this page "Tapepro repair kits"
http://www.tapepro.co.uk/?p=repairs Walls & ceilings still have some Premier bits tho they are going or gone over to Columbia. Paul at w&c told me they had spares problems from premier, and Columbia were better at the bits bit.:w00t:

Beermonster
14-08-2014, 03:12 PM
I'm thinking it's time to replace the plunger parts on my old Premier pump. It's working ok but prob not as efficient as it should be. As the Blue Line parts aren't too easy to find over here, do the Columbia or Tapetech parts all fit or are there slight differences?
Also is it possible to buy the flatbox nozzle separately? I've lost the bit you remove to fill angle boxes but begrudge paying for the whole setup when I have the main bit that bolts to the pump already.
Thanks!
Nothing else will fit that pump!
But if u get spares for it double up the plate in the pump! That will save u changing it again as the plate will b cracked and it loses the ability 2 pump! Try Belmore as that's where I get my spares from!
I have a spare kit but I will hang onto it! Sorry

tomg
19-08-2014, 09:21 PM
We do have a distributor in the UK now, details on the distributors page at tapepro.com :
SIG Distribution
Unit 2 Quadra, Sharps Close
Portsmouth, Hants, PO3 5PS
Tel +44 02392 696 733
Fax +44 02392 661 406
Portsmouth@siginteriors.co.uk
www.siginteriors.co.uk (http://www.siginteriors.co.uk/)

Contact Matt Blake on 02392 696 733

Pump parts diagram is in the downloads section of the pump page:

http://www.tapepro.com/manuals/lp_d.pdf

Cheers,
Tom.

tomg
20-08-2014, 09:23 PM
I did answer this but my reply is being vetted. I'll try it without links.
We now have a distributor in the UK:
SIG Technical Insulation
Unit 2 Quadra, Sharps Close
Portsmouth, Hants, PO3 5PS
T: 02392 696 733
F: 02392 661 406

Call Matt Blake: 02392 696 733

Cheers,
Tom.

Beermonster
21-08-2014, 03:16 PM
I did answer this but my reply is being vetted. I'll try it without links.
We now have a distributor in the UK:
SIG Technical Insulation
Unit 2 Quadra, Sharps Close
Portsmouth, Hants, PO3 5PS
T: 02392 696 733

F: 02392 661 406

Call Matt Blake: 02392 696 733

Cheers,
Tom.
Hey TomG good 2 c u over here!!:beerchug:
What r they stocking as cant find anything on their web site?

tomg
21-08-2014, 08:58 PM
Only a small amount so far and just in the Portsmouth store.
Hoping it will grow though. If there's something you're after I'm sure they could put it on the next order ...

Cheers,
Tom.

Beermonster
22-08-2014, 02:19 PM
Only a small amount so far and just in the Portsmouth store.
Hoping it will grow though. If there's something you're after I'm sure they could put it on the next order ...

Cheers,
Tom.
Good stuff Tom!!:D