Results 1 to 4 of 4

Thread: Patch up job

  1. #1
    Season ticket holder amestaper's Avatar
    Join Date
    Dec 2008
    Location
    Edinburgh
    Posts
    2,644
    Thanks Thanks Given 
    432
    Thanks Thanks Received 
    282
    Thanked in
    229 Posts

    Default Patch up job


    Usually I dislike patching other peoples mistakes but this was an exception to the rule.

    We got a call after another contractor failed to complete the first two on schedule. 3 or 4 guys had spent around 3 weeks hand taping 2 houses with plywood caulkers they had made up, not even hawks or trowels. They had quoted a price which was around a third of what it should have been and would eventually have put them out of business. We discovered that internal tapes and corners had been stuck on with PVA and coated up even though they were hollow. The internals were up for good but you could knock the window ingoes off just by leaning on them. This was the worst taping I have ever seen, no shitting.

    We fixed this for a company we had never worked for before. It was difficult, but after dealing with the first 2 houses to the best of our ability, we were offered another 12 to tape and 14 to paint and were on site for the best part of 3 months.

    I got associated with a good paying new contact. Sometimes everything is not as it appears because this job seemed a total disaster we considered walking away from. Haste ye back.
    Your messages are really important to us
    ...but not important enough to employ a sufficient number of support staff to answer them.

  2. #2
    VIP TonyM's Avatar
    Join Date
    Jan 2009
    Posts
    1,337
    Thanks Thanks Given 
    52
    Thanks Thanks Received 
    188
    Thanked in
    161 Posts

    Default

    My mate and I did a similar thing a couple of years ago. An Ex-Artexer had started taping a big dormer bungalow. He was using a plastic artex caulker. Needless to say, there were depressions in the middle of every tapered joint. Some of the joints had one coat, some two and some three. Some joints were already 18 inches wide. The nailspots were huge. He had done no internals or bead work nor ventured upstairs to the sloping ceilings and dormer windows,but had a 1000 draw off the builder and was not answering his phone.
    We finished the job and billed the builder for the total meterage, which he paid. Two or three jobs down the line, the builder is now using another complete tosser to do his jointing. They'll never learn.

  3. #3
    Administrator admin's Avatar
    Join Date
    Dec 2008
    Posts
    342
    Thanks Thanks Given 
    101
    Thanks Thanks Received 
    13
    Thanked in
    12 Posts

    Default

    This is just like the superstars thread. Some guys consider themselves time served in a few days.


  4. #4
    Newbie
    Join Date
    Jun 2009
    Location
    Falkirk
    Posts
    26
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    2
    Thanked in
    2 Posts

    Default

    I had something similar happen to me a few years back. A company I worked for brought in a new squad of tapers, who didn't like to abide by The H&S standards on-site, and after a heated 'discussion' got put off site by the manager. Little did they know the team had already run their internals, and rolled out.

    The next day they wer obviously solid, and some numpty has the job of repairing the half finished job!

    Luckily for me I got well covered for the fiasco, so it actually worked out in my favour

    Marc

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Sand down edges of drywall patch panel for tape?
    By patchtaper in forum Taping, jointing and drywall finishing
    Replies: 2
    Last Post: 08-12-2012, 01:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •