Trying to repair corner box.

**Slippy** · 29-01-2015, 06:32 PM

Hey guys. I've run into a bit of trouble replacing the center clip on my corner box. The setscrew which holds the center clip in place is rounded off so I can't remove it. Wondering if this has happened to any of you and if so how you managed to fix it.

**belmoreboy** · 30-01-2015, 05:28 PM

Originally Posted by Slippy

Hey guys. I've run into a bit of trouble replacing the center clip on my corner box. The setscrew which holds the center clip in place is rounded off so I can't remove it. Wondering if this has happened to any of you and if so how you managed to fix it.

hi slippy do you me an a "corner finisher angle head" or a corner box?

**Slippy** · 02-02-2015, 12:19 PM

Hey, yeah sorry I meant the angle finisher. The allen key I've got keeps spinning. Last time I replaced the center clip I must have rounded it off.

**belmoreboy** · 02-02-2015, 12:49 PM

Try one if these the 3mm one
http://www.ebay.co.uk/itm/5-PIECE-DA...item19deaf397e

or a slightly bigger drill bit than the screw to grab it (be careful you don't split it - as you will need to re thread the hole

Fairly tricky fix but with a steady hand can be sorted ok - we use a drill press but standard drill is ok if you're careful

let me know if we can help further

**Slippy** · 09-02-2015, 05:30 PM

That sounds tricky. Same things happened to my other corner finisher, i'm going to send them off to you guys for repairs tomorrow, it's an expensive bit of kit for me to knack up, busted two wheels off my corner roller with a simmilar problem, i'll get that sent off aswell.

Thanks for your help belmoreboy

**belmoreboy** · 09-02-2015, 05:36 PM

No worries happy to help - just pop your name and phone number in the box and we will get turned around asap - thanks

Originally Posted by Slippy

That sounds tricky. Same things happened to my other corner finisher, i'm going to send them off to you guys for repairs tomorrow, it's an expensive bit of kit for me to knack up, busted two wheels off my corner roller with a simmilar problem, i'll get that sent off aswell.

Thanks for your help belmoreboy