Free Tools - USG Sheetrock Taping Knives.

**USG** · 10-11-2009, 02:07 PM

Free Tools Anyone ?

We currently have the following sizes in stock, all with a stainless steel blade :-

4 inch,
5 inch,
6 inch,
8 inch,
10 inch,
12 inch,
14 inch

We also have a selection of jab saws and mud pans which I can send out

If you want more information on the tools we have please visit

www.sheetrocktools.com

Send me your name and address and I will send you your desired sizes.

**amestaper** · 10-11-2009, 02:41 PM

Thanks. This is appreciated Michael.

**coastaldrywall** · 10-11-2009, 05:12 PM

thanks Mike, as for the ready mix you sent it was great stuff, and sanded up a treat, thanks again

**TonyM** · 10-11-2009, 07:23 PM

I could be up for a new 6" taping knife if it's the classic type.

**dryliner8** · 10-11-2009, 09:14 PM

i could do with a new 6" blade as some one pinched the last one on the last job we did!:fing

**coastaldrywall** · 26-11-2009, 06:21 PM

i asked for a few bits and Mike sent them out pronto, well done USG, didnt see the offer of jab saws though, if your reading this Mike a couple would be nice

thanks

**swazi** · 26-11-2009, 06:40 PM

I did ask for some tools, expecting them soon. Got a reply from mike the same day when I mailed him. Look forward to using them...

**TonyM** · 26-11-2009, 06:50 PM

The 6" taping knife is nice.

**amestaper** · 26-11-2009, 07:47 PM

I didnt ask for any because I filled my pockets at the level 5 demo day in Glasgow

The handles are comfy.
I would be interested in the new style changable blade model if you need any test driven.

**USG** · 01-12-2009, 10:13 AM

In total I have probably had around 15 requests, some via the forum, whilst others via e-mail or private messages etc.

Thanks all for your messages and I hope the knives are suitable/acceptable for your needs.

The offer remains open and on going so anyone who hasnt responded yet I welcome your requests.

**swazi** · 04-12-2009, 06:15 AM

I received a 4inch, 5 inch, 14 inch and 2 mud pans yesterday. All look like really nice tools. Thanks bunch Michael...

:You_Rock_Emoticon:

**bosmorau** · 04-01-2010, 12:10 AM

i put in a request and had a very prompt reply am waiting in anticipation, thanks michael.

**Brian S** · 14-04-2010, 07:13 AM

Is this offer still open?

**MasterTaper** · 14-06-2010, 09:10 PM

hi Michael I'm anxious to get my hands on a set and give them a try. I checked them out on your website and they are nice looking tools.
would love to try your 6in hammerend 12in and 14in knifes,and a sheetrock mudpan.thx

**richie** · 16-07-2010, 06:44 PM

recived a free 14 inch knife today seem s good quality . thanks mr anderson

**DMC** · 17-07-2010, 10:03 AM

Recieved a 6 and a 14 inch blade this morning,many thanks Michael

**Gregors-07** · 19-07-2010, 08:38 PM

Is this offer still on going because i would love to try these blades out?

**richie** · 20-07-2010, 07:37 PM

used my 14 inch today on some rendering .quailty tool gonna buy a ten inch now

**kentish plasterer** · 17-04-2011, 12:23 PM

hi im in the middle of changing over too tape and jointing from plastering after 6 years iv had enough of it
im getting more calls for tacking and jointing

id be greatful for anything you wanner send me??
as i need troo change most my kit now

**turktown taper** · 20-04-2011, 08:32 PM

Originally Posted by kentish plasterer

hi im in the middle of changing over too tape and jointing from plastering after 6 years iv had enough of it
im getting more calls for tacking and jointing

id be greatful for anything you wanner send me??
as i need troo change most my kit now

dont bother this threads dead, i had no reply !!