Sanding discs help please

[Gregors-07]

Right i need another batch of 100 grit discs so just wondered what is the best on the market and whats the best quality out there.

Thanks for your time

[TonyM]

I had some 120 &100 grit yellow ones from Marcus, and they cut really well.

[Brian S]

I had some 120 &100 grit yellow ones from Marcus, and they cut really well.

+1 on that

[saleen836]

I'm using 150 grit Porter Cable discs (use quicksand j/c) although they can be pricey the discs last very well.

[turrican_007]

+2

The Belmore branded discs take some beating on price and quality.


http://www.belmoretools.co.uk/acatal...all_Discs.html

[Goodmanatee]

Try Dave at the taping store.
He's got some decent 120 grit, reasonably price as well.

[belmoreboy]

Hey all

thanks for the honest opinions i have worked my bals off to make these discs right for the drywall trade and nice to hear direct from valued customers that there as good as they can be.

But always looking to improve - value all suggestions of our products ta !

[keco drywall taper]

the best discs iv ever used is universal drywall discs

pks off 15,



i

[scottishlad2k10]

Right i need another batch of 100 grit discs so just wondered what is the best on the market and whats the best quality out there.

Thanks for your time

ive noticed some are dead pricey! like £40 + for 25 disks........ i got some red ones on ebay slightly ruff cut but i got 25 for £13.00 and i got 2 rooms out of each disk. was well worth the money and had them the next day stocked up on them too

[ProbeGT]

2 rooms, 1 disk?

damn, your mud must be REALLY hard. I can sand a whole house on the same 120 grit disk.

[scottishlad2k10]

well i use 150 gritt and they are big rooms id probably get more out of it but ive got stacks of pads + why waste time using one thats half shot :P

[crack filler]

I use the yellow ones from Belmore (really not that expensive) usually use 120 or 150 pad will normally do one or two houses hate using new ones bit harsh at the start, think the main problem the turn around is so quick the cement is still to soft

[scottishlad2k10]

I use the yellow ones from Belmore (really not that expensive) usually use 120 or 150 pad will normally do one or two houses hate using new ones bit harsh at the start, think the main problem the turn around is so quick the cement is still to soft

i bought red ones from belmore earlier ones from ebay were crap one disk per room but they done alright for 20p each lol whats the diffrence between the red and yellow belmore ones?